Header logo is ps


2016


Thumb xl smplify
Keep it SMPL: Automatic Estimation of 3D Human Pose and Shape from a Single Image

Bogo, F., Kanazawa, A., Lassner, C., Gehler, P., Romero, J., Black, M. J.

In Computer Vision – ECCV 2016, pages: 561-578, Lecture Notes in Computer Science, Springer International Publishing, October 2016 (inproceedings)

Abstract
We describe the first method to automatically estimate the 3D pose of the human body as well as its 3D shape from a single unconstrained image. We estimate a full 3D mesh and show that 2D joints alone carry a surprising amount of information about body shape. The problem is challenging because of the complexity of the human body, articulation, occlusion, clothing, lighting, and the inherent ambiguity in inferring 3D from 2D. To solve this, we fi rst use a recently published CNN-based method, DeepCut, to predict (bottom-up) the 2D body joint locations. We then fit (top-down) a recently published statistical body shape model, called SMPL, to the 2D joints. We do so by minimizing an objective function that penalizes the error between the projected 3D model joints and detected 2D joints. Because SMPL captures correlations in human shape across the population, we are able to robustly fi t it to very little data. We further leverage the 3D model to prevent solutions that cause interpenetration. We evaluate our method, SMPLify, on the Leeds Sports, HumanEva, and Human3.6M datasets, showing superior pose accuracy with respect to the state of the art.

pdf Video Sup Mat video Code Project Project Page [BibTex]

2016

pdf Video Sup Mat video Code Project Project Page [BibTex]


Thumb xl gadde
Superpixel Convolutional Networks using Bilateral Inceptions

Gadde, R., Jampani, V., Kiefel, M., Kappler, D., Gehler, P.

In European Conference on Computer Vision (ECCV), Lecture Notes in Computer Science, Springer, October 2016 (inproceedings)

Abstract
In this paper we propose a CNN architecture for semantic image segmentation. We introduce a new “bilateral inception” module that can be inserted in existing CNN architectures and performs bilateral filtering, at multiple feature-scales, between superpixels in an image. The feature spaces for bilateral filtering and other parameters of the module are learned end-to-end using standard backpropagation techniques. The bilateral inception module addresses two issues that arise with general CNN segmentation architectures. First, this module propagates information between (super) pixels while respecting image edges, thus using the structured information of the problem for improved results. Second, the layer recovers a full resolution segmentation result from the lower resolution solution of a CNN. In the experiments, we modify several existing CNN architectures by inserting our inception modules between the last CNN (1 × 1 convolution) layers. Empirical results on three different datasets show reliable improvements not only in comparison to the baseline networks, but also in comparison to several dense-pixel prediction techniques such as CRFs, while being competitive in time.

pdf supplementary poster Project Page Project Page [BibTex]

pdf supplementary poster Project Page Project Page [BibTex]


Thumb xl thumb
Barrista - Caffe Well-Served

Lassner, C., Kappler, D., Kiefel, M., Gehler, P.

In ACM Multimedia Open Source Software Competition, October 2016 (inproceedings)

Abstract
The caffe framework is one of the leading deep learning toolboxes in the machine learning and computer vision community. While it offers efficiency and configurability, it falls short of a full interface to Python. With increasingly involved procedures for training deep networks and reaching depths of hundreds of layers, creating configuration files and keeping them consistent becomes an error prone process. We introduce the barrista framework, offering full, pythonic control over caffe. It separates responsibilities and offers code to solve frequently occurring tasks for pre-processing, training and model inspection. It is compatible to all caffe versions since mid 2015 and can import and export .prototxt files. Examples are included, e.g., a deep residual network implemented in only 172 lines (for arbitrary depths), comparing to 2320 lines in the official implementation for the equivalent model.

pdf link (url) DOI Project Page [BibTex]

pdf link (url) DOI Project Page [BibTex]


Thumb xl screen shot 2016 07 25 at 13.52.05
Non-parametric Models for Structured Data and Applications to Human Bodies and Natural Scenes

Lehrmann, A.

ETH Zurich, July 2016 (phdthesis)

Abstract
The purpose of this thesis is the study of non-parametric models for structured data and their fields of application in computer vision. We aim at the development of context-sensitive architectures which are both expressive and efficient. Our focus is on directed graphical models, in particular Bayesian networks, where we combine the flexibility of non-parametric local distributions with the efficiency of a global topology with bounded treewidth. A bound on the treewidth is obtained by either constraining the maximum indegree of the underlying graph structure or by introducing determinism. The non-parametric distributions in the nodes of the graph are given by decision trees or kernel density estimators. The information flow implied by specific network topologies, especially the resultant (conditional) independencies, allows for a natural integration and control of contextual information. We distinguish between three different types of context: static, dynamic, and semantic. In four different approaches we propose models which exhibit varying combinations of these contextual properties and allow modeling of structured data in space, time, and hierarchies derived thereof. The generative character of the presented models enables a direct synthesis of plausible hypotheses. Extensive experiments validate the developed models in two application scenarios which are of particular interest in computer vision: human bodies and natural scenes. In the practical sections of this work we discuss both areas from different angles and show applications of our models to human pose, motion, and segmentation as well as object categorization and localization. Here, we benefit from the availability of modern datasets of unprecedented size and diversity. Comparisons to traditional approaches and state-of-the-art research on the basis of well-established evaluation criteria allows the objective assessment of our contributions.

pdf [BibTex]


Thumb xl cover
Dynamic baseline stereo vision-based cooperative target tracking

Ahmad, A., Ruff, E., Bülthoff, H.

19th International Conference on Information Fusion, pages: 1728-1734, July 2016 (conference)

Abstract
In this article we present a new method for multi-robot cooperative target tracking based on dynamic baseline stereo vision. The core novelty of our approach includes a computationally light-weight scheme to compute the 3D stereo measurements that exactly satisfy the epipolar constraints and a covariance intersection (CI)-based method to fuse the 3D measurements obtained by each individual robot. Using CI we are able to systematically integrate the robot localization uncertainties as well as the uncertainties in the measurements generated by the monocular camera images from each individual robot into the resulting stereo measurements. Through an extensive set of simulation and real robot results we show the robustness and accuracy of our approach with respect to ground truth. The source code related to this article is publicly accessible on our website and the datasets are available on request.

DOI [BibTex]

DOI [BibTex]


Thumb xl teaser
DeepCut: Joint Subset Partition and Labeling for Multi Person Pose Estimation

Pishchulin, L., Insafutdinov, E., Tang, S., Andres, B., Andriluka, M., Gehler, P., Schiele, B.

In 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR), pages: 4929-4937, IEEE, June 2016 (inproceedings)

Abstract
This paper considers the task of articulated human pose estimation of multiple people in real-world images. We propose an approach that jointly solves the tasks of detection and pose estimation: it infers the number of persons in a scene, identifies occluded body parts, and disambiguates body parts between people in close proximity of each other. This joint formulation is in contrast to previous strategies, that address the problem by first detecting people and subsequently estimating their body pose. We propose a partitioning and labeling formulation of a set of body-part hypotheses generated with CNN-based part detectors. Our formulation, an instance of an integer linear program, implicitly performs non-maximum suppression on the set of part candidates and groups them to form configurations of body parts respecting geometric and appearance constraints. Experiments on four different datasets demonstrate state-of-the-art results for both single person and multi person pose estimation.

code pdf supplementary DOI Project Page [BibTex]

code pdf supplementary DOI Project Page [BibTex]


Thumb xl tsaiteaser
Video segmentation via object flow

Tsai, Y., Yang, M., Black, M. J.

In IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), June 2016 (inproceedings)

Abstract
Video object segmentation is challenging due to fast moving objects, deforming shapes, and cluttered backgrounds. Optical flow can be used to propagate an object segmentation over time but, unfortunately, flow is often inaccurate, particularly around object boundaries. Such boundaries are precisely where we want our segmentation to be accurate. To obtain accurate segmentation across time, we propose an efficient algorithm that considers video segmentation and optical flow estimation simultaneously. For video segmentation, we formulate a principled, multiscale, spatio-temporal objective function that uses optical flow to propagate information between frames. For optical flow estimation, particularly at object boundaries, we compute the flow independently in the segmented regions and recompose the results. We call the process object flow and demonstrate the effectiveness of jointly optimizing optical flow and video segmentation using an iterative scheme. Experiments on the SegTrack v2 and Youtube-Objects datasets show that the proposed algorithm performs favorably against the other state-of-the-art methods.

pdf [BibTex]

pdf [BibTex]


Thumb xl capital
Patches, Planes and Probabilities: A Non-local Prior for Volumetric 3D Reconstruction

Ulusoy, A. O., Black, M. J., Geiger, A.

In IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), June 2016 (inproceedings)

Abstract
In this paper, we propose a non-local structured prior for volumetric multi-view 3D reconstruction. Towards this goal, we present a novel Markov random field model based on ray potentials in which assumptions about large 3D surface patches such as planarity or Manhattan world constraints can be efficiently encoded as probabilistic priors. We further derive an inference algorithm that reasons jointly about voxels, pixels and image segments, and estimates marginal distributions of appearance, occupancy, depth, normals and planarity. Key to tractable inference is a novel hybrid representation that spans both voxel and pixel space and that integrates non-local information from 2D image segmentations in a principled way. We compare our non-local prior to commonly employed local smoothness assumptions and a variety of state-of-the-art volumetric reconstruction baselines on challenging outdoor scenes with textureless and reflective surfaces. Our experiments indicate that regularizing over larger distances has the potential to resolve ambiguities where local regularizers fail.

YouTube pdf poster suppmat Project Page [BibTex]


Thumb xl header
Optical Flow with Semantic Segmentation and Localized Layers

Sevilla-Lara, L., Sun, D., Jampani, V., Black, M. J.

In IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), pages: 3889-3898, June 2016 (inproceedings)

Abstract
Existing optical flow methods make generic, spatially homogeneous, assumptions about the spatial structure of the flow. In reality, optical flow varies across an image depending on object class. Simply put, different objects move differently. Here we exploit recent advances in static semantic scene segmentation to segment the image into objects of different types. We define different models of image motion in these regions depending on the type of object. For example, we model the motion on roads with homographies, vegetation with spatially smooth flow, and independently moving objects like cars and planes with affine motion plus deviations. We then pose the flow estimation problem using a novel formulation of localized layers, which addresses limitations of traditional layered models for dealing with complex scene motion. Our semantic flow method achieves the lowest error of any published monocular method in the KITTI-2015 flow benchmark and produces qualitatively better flow and segmentation than recent top methods on a wide range of natural videos.

video Kitti Precomputed Data (1.6GB) pdf YouTube Sequences Code Project Page Project Page [BibTex]


Thumb xl tes cvpr16 bilateral
Learning Sparse High Dimensional Filters: Image Filtering, Dense CRFs and Bilateral Neural Networks

Jampani, V., Kiefel, M., Gehler, P. V.

In IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), pages: 4452-4461, June 2016 (inproceedings)

Abstract
Bilateral filters have wide spread use due to their edge-preserving properties. The common use case is to manually choose a parametric filter type, usually a Gaussian filter. In this paper, we will generalize the parametrization and in particular derive a gradient descent algorithm so the filter parameters can be learned from data. This derivation allows to learn high dimensional linear filters that operate in sparsely populated feature spaces. We build on the permutohedral lattice construction for efficient filtering. The ability to learn more general forms of high-dimensional filters can be used in several diverse applications. First, we demonstrate the use in applications where single filter applications are desired for runtime reasons. Further, we show how this algorithm can be used to learn the pairwise potentials in densely connected conditional random fields and apply these to different image segmentation tasks. Finally, we introduce layers of bilateral filters in CNNs and propose bilateral neural networks for the use of high-dimensional sparse data. This view provides new ways to encode model structure into network architectures. A diverse set of experiments empirically validates the usage of general forms of filters.

project page code CVF open-access pdf supplementary poster Project Page Project Page [BibTex]


Thumb xl futeaser
Occlusion boundary detection via deep exploration of context

Fu, H., Wang, C., Tao, D., Black, M. J.

In IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), June 2016 (inproceedings)

Abstract
Occlusion boundaries contain rich perceptual information about the underlying scene structure. They also provide important cues in many visual perception tasks such as scene understanding, object recognition, and segmentation. In this paper, we improve occlusion boundary detection via enhanced exploration of contextual information (e.g., local structural boundary patterns, observations from surrounding regions, and temporal context), and in doing so develop a novel approach based on convolutional neural networks (CNNs) and conditional random fields (CRFs). Experimental results demonstrate that our detector significantly outperforms the state-of-the-art (e.g., improving the F-measure from 0.62 to 0.71 on the commonly used CMU benchmark). Last but not least, we empirically assess the roles of several important components of the proposed detector, so as to validate the rationale behind this approach.

pdf [BibTex]

pdf [BibTex]


Thumb xl jun teaser
Semantic Instance Annotation of Street Scenes by 3D to 2D Label Transfer

Xie, J., Kiefel, M., Sun, M., Geiger, A.

In IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), June 2016 (inproceedings)

Abstract
Semantic annotations are vital for training models for object recognition, semantic segmentation or scene understanding. Unfortunately, pixelwise annotation of images at very large scale is labor-intensive and only little labeled data is available, particularly at instance level and for street scenes. In this paper, we propose to tackle this problem by lifting the semantic instance labeling task from 2D into 3D. Given reconstructions from stereo or laser data, we annotate static 3D scene elements with rough bounding primitives and develop a probabilistic model which transfers this information into the image domain. We leverage our method to obtain 2D labels for a novel suburban video dataset which we have collected, resulting in 400k semantic and instance image annotations. A comparison of our method to state-of-the-art label transfer baselines reveals that 3D information enables more efficient annotation while at the same time resulting in improved accuracy and time-coherent labels.

pdf suppmat Project Page Project Page [BibTex]

pdf suppmat Project Page Project Page [BibTex]


Thumb xl appealingavatarsbig
Appealing female avatars from 3D body scans: Perceptual effects of stylization

Fleming, R., Mohler, B., Romero, J., Black, M. J., Breidt, M.

In 11th Int. Conf. on Computer Graphics Theory and Applications (GRAPP), Febuary 2016 (inproceedings)

Abstract
Advances in 3D scanning technology allow us to create realistic virtual avatars from full body 3D scan data. However, negative reactions to some realistic computer generated humans suggest that this approach might not always provide the most appealing results. Using styles derived from existing popular character designs, we present a novel automatic stylization technique for body shape and colour information based on a statistical 3D model of human bodies. We investigate whether such stylized body shapes result in increased perceived appeal with two different experiments: One focuses on body shape alone, the other investigates the additional role of surface colour and lighting. Our results consistently show that the most appealing avatar is a partially stylized one. Importantly, avatars with high stylization or no stylization at all were rated to have the least appeal. The inclusion of colour information and improvements to render quality had no significant effect on the overall perceived appeal of the avatars, and we observe that the body shape primarily drives the change in appeal ratings. For body scans with colour information, we found that a partially stylized avatar was most effective, increasing average appeal ratings by approximately 34%.

pdf Project Page [BibTex]

pdf Project Page [BibTex]


Thumb xl teaser
Deep Discrete Flow

Güney, F., Geiger, A.

Asian Conference on Computer Vision (ACCV), 2016 (conference) Accepted

pdf suppmat Project Page [BibTex]

pdf suppmat Project Page [BibTex]


Thumb xl siyu eccvw
Multi-Person Tracking by Multicuts and Deep Matching

(Winner of the Multi-Object Tracking Challenge ECCV 2016)

Tang, S., Andres, B., Andriluka, M., Schiele, B.

ECCV Workshop on Benchmarking Mutliple Object Tracking, 2016 (conference)

PDF [BibTex]

PDF [BibTex]


Thumb xl website thumbnail
Reconstructing Articulated Rigged Models from RGB-D Videos

Tzionas, D., Gall, J.

In European Conference on Computer Vision Workshops 2016 (ECCVW’16) - Workshop on Recovering 6D Object Pose (R6D’16), pages: 620-633, Springer International Publishing, 2016 (inproceedings)

Abstract
Although commercial and open-source software exist to reconstruct a static object from a sequence recorded with an RGB-D sensor, there is a lack of tools that build rigged models of articulated objects that deform realistically and can be used for tracking or animation. In this work, we fill this gap and propose a method that creates a fully rigged model of an articulated object from depth data of a single sensor. To this end, we combine deformable mesh tracking, motion segmentation based on spectral clustering and skeletonization based on mean curvature flow. The fully rigged model then consists of a watertight mesh, embedded skeleton, and skinning weights.

pdf suppl Project's Website YouTube link (url) DOI [BibTex]

pdf suppl Project's Website YouTube link (url) DOI [BibTex]


Thumb xl jointmc
A Multi-cut Formulation for Joint Segmentation and Tracking of Multiple Objects

Keuper, M., Tang, S., Yu, Z., Andres, B., Brox, T., Schiele, B.

In arXiv:1607.06317, 2016 (inproceedings)

PDF [BibTex]

PDF [BibTex]

2012


Thumb xl jampani icvgip 12
Assessment of Computational Visual Attention Models on Medical Images

Jampani, V., Ujjwal, , Sivaswamy, J., Vaidya, V.

Proceedings of the Eighth Indian Conference on Computer Vision, Graphics and Image Processing, pages: 80:1-80:8, ACM, Mumbai, India, December 2012 (conference)

Abstract
Visual attention plays a major role in our lives. Our very perception (which very much decides our survival) depends on it - like perceiving a predator while walking through a forest, perceiving a fast car coming from the front on a busy road or even spotting our favorite color out of the many colors. In Medical Imaging, where medical experts have to take major clinical decisions based on the examination of images of various kinds (CT, MRI etc), visual attention plays a pivotal role. It makes the medical experts fixate on any abnormal behavior exhibited in the medical image and helps in speedy diagnosis. Many previous works (see the paper for details) have exhibited this important fact and the model proposed by Nodine and Kundel highlights the important role of visual attention in medical image diagnosis. Visual attention involves two components - Bottom-Up and Top-Down.In the present work, we examine a number of established computational models of visual attention in the context of chest X-rays (infected with Pneumoconiosis) and retinal images (having hard exudates). The fundamental motivation is to try to understand the applicability of visual attention models in the context of different types of abnormalities. Our assessment of four popular visual attention models, is extensive and shows that they are able to pick up abnormal features reasonably well. We compare the models towards detecting subtle abnormalities and high-contrast lesions. Although significant scope of improvements exists especially in picking up more subtle abnormalities and getting more selective towards picking up more abnormalities and less normal structures, the presented assessment shows that visual attention indeed shows a promise for inclusion in the main field of medical image analysis

url pdf poster link (url) [BibTex]

2012

url pdf poster link (url) [BibTex]


Thumb xl pengthesisteaser
Virtual Human Bodies with Clothing and Hair: From Images to Animation

Guan, P.

Brown University, Department of Computer Science, December 2012 (phdthesis)

pdf [BibTex]

pdf [BibTex]


Thumb xl coregtr
Coregistration: Supplemental Material

Hirshberg, D., Loper, M., Rachlin, E., Black, M. J.

(No. 4), Max Planck Institute for Intelligent Systems, October 2012 (techreport)

pdf [BibTex]

pdf [BibTex]


Thumb xl paperfig
Lie Bodies: A Manifold Representation of 3D Human Shape

Freifeld, O., Black, M. J.

In European Conf. on Computer Vision (ECCV), pages: 1-14, Part I, LNCS 7572, (Editors: A. Fitzgibbon et al. (Eds.)), Springer-Verlag, October 2012 (inproceedings)

Abstract
Three-dimensional object shape is commonly represented in terms of deformations of a triangular mesh from an exemplar shape. Existing models, however, are based on a Euclidean representation of shape deformations. In contrast, we argue that shape has a manifold structure: For example, summing the shape deformations for two people does not necessarily yield a deformation corresponding to a valid human shape, nor does the Euclidean difference of these two deformations provide a meaningful measure of shape dissimilarity. Consequently, we define a novel manifold for shape representation, with emphasis on body shapes, using a new Lie group of deformations. This has several advantages. First we define triangle deformations exactly, removing non-physical deformations and redundant degrees of freedom common to previous methods. Second, the Riemannian structure of Lie Bodies enables a more meaningful definition of body shape similarity by measuring distance between bodies on the manifold of body shape deformations. Third, the group structure allows the valid composition of deformations. This is important for models that factor body shape deformations into multiple causes or represent shape as a linear combination of basis shapes. Finally, body shape variation is modeled using statistics on manifolds. Instead of modeling Euclidean shape variation with Principal Component Analysis we capture shape variation on the manifold using Principal Geodesic Analysis. Our experiments show consistent visual and quantitative advantages of Lie Bodies over traditional Euclidean models of shape deformation and our representation can be easily incorporated into existing methods.

pdf supplemental material youtube poster eigenshape video code Project Page Project Page Project Page [BibTex]

pdf supplemental material youtube poster eigenshape video code Project Page Project Page Project Page [BibTex]


Thumb xl coregteaser
Coregistration: Simultaneous alignment and modeling of articulated 3D shape

Hirshberg, D., Loper, M., Rachlin, E., Black, M.

In European Conf. on Computer Vision (ECCV), pages: 242-255, LNCS 7577, Part IV, (Editors: A. Fitzgibbon et al. (Eds.)), Springer-Verlag, October 2012 (inproceedings)

Abstract
Three-dimensional (3D) shape models are powerful because they enable the inference of object shape from incomplete, noisy, or ambiguous 2D or 3D data. For example, realistic parameterized 3D human body models have been used to infer the shape and pose of people from images. To train such models, a corpus of 3D body scans is typically brought into registration by aligning a common 3D human-shaped template to each scan. This is an ill-posed problem that typically involves solving an optimization problem with regularization terms that penalize implausible deformations of the template. When aligning a corpus, however, we can do better than generic regularization. If we have a model of how the template can deform then alignments can be regularized by this model. Constructing a model of deformations, however, requires having a corpus that is already registered. We address this chicken-and-egg problem by approaching modeling and registration together. By minimizing a single objective function, we reliably obtain high quality registration of noisy, incomplete, laser scans, while simultaneously learning a highly realistic articulated body model. The model greatly improves robustness to noise and missing data. Since the model explains a corpus of body scans, it captures how body shape varies across people and poses.

pdf publisher site poster supplemental material (400MB) Project Page Project Page [BibTex]

pdf publisher site poster supplemental material (400MB) Project Page Project Page [BibTex]


Thumb xl lietr
Lie Bodies: A Manifold Representation of 3D Human Shape. Supplemental Material

Freifeld, O., Black, M. J.

(No. 5), Max Planck Institute for Intelligent Systems, October 2012 (techreport)

pdf Project Page [BibTex]

pdf Project Page [BibTex]


Thumb xl sinteltr
MPI-Sintel Optical Flow Benchmark: Supplemental Material

Butler, D. J., Wulff, J., Stanley, G. B., Black, M. J.

(No. 6), Max Planck Institute for Intelligent Systems, October 2012 (techreport)

pdf Project Page [BibTex]

pdf Project Page [BibTex]


Thumb xl sintelworkshop
Lessons and insights from creating a synthetic optical flow benchmark

Wulff, J., Butler, D. J., Stanley, G. B., Black, M. J.

In ECCV Workshop on Unsolved Problems in Optical Flow and Stereo Estimation, pages: 168-177, Part II, LNCS 7584, (Editors: A. Fusiello et al. (Eds.)), Springer-Verlag, October 2012 (inproceedings)

pdf dataset poster youtube Project Page [BibTex]

pdf dataset poster youtube Project Page [BibTex]


Thumb xl tripod seq 16 054 part 3d vis
3D2PM – 3D Deformable Part Models

Pepik, B., Gehler, P., Stark, M., Schiele, B.

In Proceedings of the European Conference on Computer Vision (ECCV), pages: 356-370, Lecture Notes in Computer Science, (Editors: Fitzgibbon, Andrew W. and Lazebnik, Svetlana and Perona, Pietro and Sato, Yoichi and Schmid, Cordelia), Springer, Firenze, October 2012 (inproceedings)

pdf video poster Project Page [BibTex]

pdf video poster Project Page [BibTex]


Thumb xl sinteleccv2012crop
A naturalistic open source movie for optical flow evaluation

Butler, D. J., Wulff, J., Stanley, G. B., Black, M. J.

In European Conf. on Computer Vision (ECCV), pages: 611-625, Part IV, LNCS 7577, (Editors: A. Fitzgibbon et al. (Eds.)), Springer-Verlag, October 2012 (inproceedings)

Abstract
Ground truth optical flow is difficult to measure in real scenes with natural motion. As a result, optical flow data sets are restricted in terms of size, complexity, and diversity, making optical flow algorithms difficult to train and test on realistic data. We introduce a new optical flow data set derived from the open source 3D animated short film Sintel. This data set has important features not present in the popular Middlebury flow evaluation: long sequences, large motions, specular reflections, motion blur, defocus blur, and atmospheric effects. Because the graphics data that generated the movie is open source, we are able to render scenes under conditions of varying complexity to evaluate where existing flow algorithms fail. We evaluate several recent optical flow algorithms and find that current highly-ranked methods on the Middlebury evaluation have difficulty with this more complex data set suggesting further research on optical flow estimation is needed. To validate the use of synthetic data, we compare the image- and flow-statistics of Sintel to those of real films and videos and show that they are similar. The data set, metrics, and evaluation website are publicly available.

pdf dataset youtube talk supplemental material Project Page Project Page [BibTex]

pdf dataset youtube talk supplemental material Project Page Project Page [BibTex]


Thumb xl ijstsp2012
Characterization of 3-D Volumetric Probabilistic Scenes for Object Recognition

Restrepo, M. I., Mayer, B. A., Ulusoy, A. O., Mundy, J. L.

In Selected Topics in Signal Processing, IEEE Journal of, 6(5):522-537, September 2012 (inproceedings)

Abstract
This paper presents a new volumetric representation for categorizing objects in large-scale 3-D scenes reconstructed from image sequences. This work uses a probabilistic volumetric model (PVM) that combines the ideas of background modeling and volumetric multi-view reconstruction to handle the uncertainty inherent in the problem of reconstructing 3-D structures from 2-D images. The advantages of probabilistic modeling have been demonstrated by recent application of the PVM representation to video image registration, change detection and classification of changes based on PVM context. The applications just mentioned, operate on 2-D projections of the PVM. This paper presents the first work to characterize and use the local 3-D information in the scenes. Two approaches to local feature description are proposed and compared: 1) features derived from a PCA analysis of model neighborhoods; and 2) features derived from the coefficients of a 3-D Taylor series expansion within each neighborhood. The resulting description is used in a bag-of-features approach to classify buildings, houses, cars, planes, and parking lots learned from aerial imagery collected over Providence, RI. It is shown that both feature descriptions explain the data with similar accuracy and their effectiveness for dense-feature categorization is compared for the different classes. Finally, 3-D extensions of the Harris corner detector and a Hessian-based detector are used to detect salient features. Both types of salient features are evaluated through object categorization experiments, where only features with maximal response are retained. For most saliency criteria tested, features based on the determinant of the Hessian achieved higher classification accuracy than Harris-based features.

pdf DOI [BibTex]

pdf DOI [BibTex]


Thumb xl embs2012
A framework for relating neural activity to freely moving behavior

Foster, J. D., Nuyujukian, P., Freifeld, O., Ryu, S., Black, M. J., Shenoy, K. V.

In 34th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’12), pages: 2736 -2739 , IEEE, San Diego, August 2012 (inproceedings)

pdf Project Page [BibTex]

pdf Project Page [BibTex]


Thumb xl screen shot 2012 06 25 at 1.59.41 pm
Pottics – The Potts Topic Model for Semantic Image Segmentation

Dann, C., Gehler, P., Roth, S., Nowozin, S.

In Proceedings of 34th DAGM Symposium, pages: 397-407, Lecture Notes in Computer Science, (Editors: Pinz, Axel and Pock, Thomas and Bischof, Horst and Leberl, Franz), Springer, August 2012 (inproceedings)

code pdf poster [BibTex]

code pdf poster [BibTex]


Thumb xl embs
Psoriasis segmentation through chromatic regions and Geometric Active Contours

Bogo, F., Samory, M., Belloni Fortina, A., Piaserico, S., Peserico, E.

In 34th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’12), pages: 5388-5391, San Diego, August 2012 (inproceedings)

pdf [BibTex]

pdf [BibTex]


Thumb xl teaser pca sampling
PCA-enhanced stochastic optimization methods

Kuznetsova, A., Pons-Moll, G., Rosenhahn, B.

In German Conference on Pattern Recognition (GCPR), August 2012 (inproceedings)

pdf [BibTex]

pdf [BibTex]


Thumb xl thumb hennigk2012
Quasi-Newton Methods: A New Direction

Hennig, P., Kiefel, M.

In Proceedings of the 29th International Conference on Machine Learning, pages: 25-32, ICML ’12, (Editors: John Langford and Joelle Pineau), Omnipress, New York, NY, USA, July 2012 (inproceedings)

Abstract
Four decades after their invention, quasi- Newton methods are still state of the art in unconstrained numerical optimization. Although not usually interpreted thus, these are learning algorithms that fit a local quadratic approximation to the objective function. We show that many, including the most popular, quasi-Newton methods can be interpreted as approximations of Bayesian linear regression under varying prior assumptions. This new notion elucidates some shortcomings of classical algorithms, and lights the way to a novel nonparametric quasi-Newton method, which is able to make more efficient use of available information at computational cost similar to its predecessors.

website+code pdf link (url) [BibTex]

website+code pdf link (url) [BibTex]


Thumb xl screen shot 2012 06 25 at 2.04.30 pm
Learning Search Based Inference for Object Detection

Gehler, P., Lehmann, A.

In International Conference on Machine Learning (ICML) workshop on Inferning: Interactions between Inference and Learning, Edinburgh, Scotland, UK, July 2012, short version of BMVC11 paper (http://ps.is.tue.mpg.de/publications/31/get_file) (inproceedings)

pdf [BibTex]

pdf [BibTex]


Thumb xl deqingthesisteaser
From Pixels to Layers: Joint Motion Estimation and Segmentation

Sun, D.

Brown University, Department of Computer Science, July 2012 (phdthesis)

pdf [BibTex]

pdf [BibTex]


Thumb xl df image
Distribution Fields for Tracking

Sevilla-Lara, L., Learned-Miller, E.

In Proceedings IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), Providence, RI, USA, June 2012 (inproceedings)

Abstract
Visual tracking of general objects often relies on the assumption that gradient descent of the alignment function will reach the global optimum. A common technique to smooth the objective function is to blur the image. However, blurring the image destroys image information, which can cause the target to be lost. To address this problem we introduce a method for building an image descriptor using distribution fields (DFs), a representation that allows smoothing the objective function without destroying information about pixel values. We present experimental evidence on the superiority of the width of the basin of attraction around the global optimum of DFs over other descriptors. DFs also allow the representation of uncertainty about the tracked object. This helps in disregarding outliers during tracking (like occlusions or small misalignments) without modeling them explicitly. Finally, this provides a convenient way to aggregate the observations of the object through time and maintain an updated model. We present a simple tracking algorithm that uses DFs and obtains state-of-the-art results on standard benchmarks.

pdf Matlab code [BibTex]

pdf Matlab code [BibTex]


Thumb xl frompstods2
From pictorial structures to deformable structures

Zuffi, S., Freifeld, O., Black, M. J.

In IEEE Conf. on Computer Vision and Pattern Recognition (CVPR), pages: 3546-3553, IEEE, June 2012 (inproceedings)

Abstract
Pictorial Structures (PS) define a probabilistic model of 2D articulated objects in images. Typical PS models assume an object can be represented by a set of rigid parts connected with pairwise constraints that define the prior probability of part configurations. These models are widely used to represent non-rigid articulated objects such as humans and animals despite the fact that such objects have parts that deform non-rigidly. Here we define a new Deformable Structures (DS) model that is a natural extension of previous PS models and that captures the non-rigid shape deformation of the parts. Each part in a DS model is represented by a low-dimensional shape deformation space and pairwise potentials between parts capture how the shape varies with pose and the shape of neighboring parts. A key advantage of such a model is that it more accurately models object boundaries. This enables image likelihood models that are more discriminative than previous PS likelihoods. This likelihood is learned using training imagery annotated using a DS “puppet.” We focus on a human DS model learned from 2D projections of a realistic 3D human body model and use it to infer human poses in images using a form of non-parametric belief propagation.

pdf sup mat code poster Project Page Project Page Project Page Project Page [BibTex]

pdf sup mat code poster Project Page Project Page Project Page Project Page [BibTex]


Thumb xl screen shot 2012 03 22 at 17.51.07
Teaching 3D Geometry to Deformable Part Models

Pepik, B., Stark, M., Gehler, P., Schiele, B.

In IEEE Conference on Computer Vision and Pattern Recognition (CVPR), pages: 3362 -3369, IEEE, Providence, RI, USA, June 2012, oral presentation (inproceedings)

pdf DOI Project Page [BibTex]

pdf DOI Project Page [BibTex]


Thumb xl teaser cvpr2012
Branch-and-price global optimization for multi-view multi-object tracking

Leal-Taixé, L., Pons-Moll, G., Rosenhahn, B.

In IEEE Conference on Computer Vision and Pattern Recognition (CVPR), June 2012 (inproceedings)

project page paper poster [BibTex]

project page paper poster [BibTex]


Thumb xl cvpr small
A physically-based approach to reflection separation

Kong, N., Tai, Y., Shin, S. Y.

In Proc. IEEE Conference on Computer Vision and Pattern Recognition (CVPR), pages: 9-16, June 2012 (inproceedings)

Abstract
We propose a physically-based approach to separate reflection using multiple polarized images with a background scene captured behind glass. The input consists of three polarized images, each captured from the same view point but with a different polarizer angle separated by 45 degrees. The output is the high-quality separation of the reflection and background layers from each of the input images. A main technical challenge for this problem is that the mixing coefficient for the reflection and background layers depends on the angle of incidence and the orientation of the plane of incidence, which are spatially-varying over the pixels of an image. Exploiting physical properties of polarization for a double-surfaced glass medium, we propose an algorithm which automatically finds the optimal separation of the reflection and background layers. Thorough experiments, we demonstrate that our approach can generate superior results to those of previous methods.

Publisher site [BibTex]

Publisher site [BibTex]


Thumb xl screenshot area 2015 07 27 011047
An Analysis of Successful Approaches to Human Pose Estimation

Lassner, C.

An Analysis of Successful Approaches to Human Pose Estimation, University of Augsburg, University of Augsburg, May 2012 (mastersthesis)

Abstract
The field of Human Pose Estimation is developing fast and lately leaped forward with the release of the Kinect system. That system reaches a very good perfor- mance for pose estimation using 3D scene information, however pose estimation from 2D color images is not solved reliably yet. There is a vast amount of pub- lications trying to reach this aim, but no compilation of important methods and solution strategies. The aim of this thesis is to fill this gap: it gives an introductory overview over important techniques by analyzing four current (2012) publications in detail. They are chosen such, that during their analysis many frequently used techniques for Human Pose Estimation can be explained. The thesis includes two introductory chapters with a definition of Human Pose Estimation and exploration of the main difficulties, as well as a detailed explanation of frequently used methods. A final chapter presents some ideas on how parts of the analyzed approaches can be recombined and shows some open questions that can be tackled in future work. The thesis is therefore a good entry point to the field of Human Pose Estimation and enables the reader to get an impression of the current state-of-the-art.

pdf [BibTex]

pdf [BibTex]


Thumb xl humim2012
HUMIM Software for Articulated Tracking

Soren Hauberg, Kim S. Pedersen

(01/2012), Department of Computer Science, University of Copenhagen, January 2012 (techreport)

Code PDF [BibTex]

Code PDF [BibTex]


Thumb xl tr feragen2012
A geometric framework for statistics on trees

Aasa Feragen, Mads Nielsen, Soren Hauberg, Pechin Lo, Marleen de Bruijne, Francois Lauze

(11/02), Department of Computer Science, University of Copenhagen, January 2012 (techreport)

PDF [BibTex]

PDF [BibTex]


Thumb xl 3dimpvt2012
High Resolution Surface Reconstruction from Multi-view Aerial Imagery

Calakli, F., Ulusoy, A. O., Restrepo, M. I., Taubin, G., Mundy, J. L.

In 3D Imaging Modeling Processing Visualization Transmission (3DIMPVT), pages: 25-32, IEEE, 2012 (inproceedings)

Abstract
This paper presents a novel framework for surface reconstruction from multi-view aerial imagery of large scale urban scenes, which combines probabilistic volumetric modeling with smooth signed distance surface estimation, to produce very detailed and accurate surfaces. Using a continuous probabilistic volumetric model which allows for explicit representation of ambiguities caused by moving objects, reflective surfaces, areas of constant appearance, and self-occlusions, the algorithm learns the geometry and appearance of a scene from a calibrated image sequence. An online implementation of Bayesian learning precess in GPUs significantly reduces the time required to process a large number of images. The probabilistic volumetric model of occupancy is subsequently used to estimate a smooth approximation of the signed distance function to the surface. This step, which reduces to the solution of a sparse linear system, is very efficient and scalable to large data sets. The proposed algorithm is shown to produce high quality surfaces in challenging aerial scenes where previous methods make large errors in surface localization. The general applicability of the algorithm beyond aerial imagery is confirmed against the Middlebury benchmark.

Video pdf link (url) DOI [BibTex]

Video pdf link (url) DOI [BibTex]


Thumb xl tang2012bmvc
Detection and Tracking of Occluded People

(Best Paper Award)

Tang, S., Andriluka, M., Schiele, B.

In British Machine Vision Conference (BMVC), 2012, BMVC Best Paper Award (inproceedings)

PDF [BibTex]

PDF [BibTex]


Thumb xl segmentation isbi12
3D Cardiac Segmentation with Pose-Invariant Higher-Order MRFs

Xiang, B., Wang, C., Deux, J., Rahmouni, A., Paragios, N.

In IEEE International Symposium on Biomedical Imaging (ISBI), 2012 (inproceedings)

[BibTex]

[BibTex]


Thumb xl facialfeature
Real-time Facial Feature Detection using Conditional Regression Forests

Dantone, M., Gall, J., Fanelli, G., van Gool, L.

In IEEE Conference on Computer Vision and Pattern Recognition (CVPR), pages: 2578-2585, IEEE, Providence, RI, USA, 2012 (inproceedings)

code pdf Project Page [BibTex]

code pdf Project Page [BibTex]


Thumb xl lht
Latent Hough Transform for Object Detection

Razavi, N., Gall, J., Kohli, P., van Gool, L.

In European Conference on Computer Vision (ECCV), 7574, pages: 312-325, LNCS, Springer, 2012 (inproceedings)

pdf Project Page [BibTex]

pdf Project Page [BibTex]


Thumb xl destflow
Destination Flow for Crowd Simulation

Pellegrini, S., Gall, J., Sigal, L., van Gool, L.

In Workshop on Analysis and Retrieval of Tracked Events and Motion in Imagery Streams, 7585, pages: 162-171, LNCS, Springer, 2012 (inproceedings)

pdf Project Page [BibTex]

pdf Project Page [BibTex]


Thumb xl soumyanips
From Deformations to Parts: Motion-based Segmentation of 3D Objects

Ghosh, S., Sudderth, E., Loper, M., Black, M.

In Advances in Neural Information Processing Systems 25 (NIPS), pages: 2006-2014, (Editors: P. Bartlett and F.C.N. Pereira and C.J.C. Burges and L. Bottou and K.Q. Weinberger), MIT Press, 2012 (inproceedings)

Abstract
We develop a method for discovering the parts of an articulated object from aligned meshes of the object in various three-dimensional poses. We adapt the distance dependent Chinese restaurant process (ddCRP) to allow nonparametric discovery of a potentially unbounded number of parts, while simultaneously guaranteeing a spatially connected segmentation. To allow analysis of datasets in which object instances have varying 3D shapes, we model part variability across poses via affine transformations. By placing a matrix normal-inverse-Wishart prior on these affine transformations, we develop a ddCRP Gibbs sampler which tractably marginalizes over transformation uncertainty. Analyzing a dataset of humans captured in dozens of poses, we infer parts which provide quantitatively better deformation predictions than conventional clustering methods.

pdf supplemental code poster link (url) Project Page [BibTex]

pdf supplemental code poster link (url) Project Page [BibTex]